P1000 Door stops

[JimH1]

Has anyone replaced the junk door straps on the honda hard cab . My drivers door strap tore loose, its really a bad design

 

[Admin]

 

[CumminsPusher]

Has anyone replaced the junk door straps on the honda hard cab . My drivers door strap tore loose, its really a bad design

Is there enough room you could use a high-pressure gas strut?

 

[jocojonson]

Is there enough room you could use a high-pressure gas strut?

Has anyone replaced the junk door straps on the honda hard cab . My drivers door strap tore loose, its really a bad design

I doubled up black tie down strap same length.

 

[JimH1]

Is there enough room you could use a high-pressure gas strut?

No but that would be awesome

 

[JimH1]

Ok here is what I came up with, they are mini rubber bungies That you can see I trimmed up and I have some 1/16 stainless cable that I will make up that will be an 1" or 2 longer to work as a stop to prevent over travel.

 

[CumminsPusher]

Ok here is what I came up with, they are mini rubber bungies That you can see I trimmed up and I have some 1/16 stainless cable that I will make up that will be an 1" or 2 longer to work as a stop to prevent over travel.View attachment 30885 View attachment 30886 View attachment 30887 View attachment 30887

That should be easier on everything too because of the elastic. That looks to be a pretty good idea!


Sent from my iPhone using Tapatalk

 

[PioneerPete]

Ok here is what I came up with, they are mini rubber bungies That you can see I trimmed up and I have some 1/16 stainless cable that I will make up that will be an 1" or 2 longer to work as a stop to prevent over travel.View attachment 30885 View attachment 30886 View attachment 30887 View attachment 30887

watching... curious to see this installed...

 

[JimH1]

Well here is the installed bungee, It will need the extra cable as a stop. It stretches way to far

 

[CumminsPusher]

Well here is the installed bungee, It will need the extra cable as a stop. It stretches way to far View attachment 31101

I was hoping that would could do it but you're right with a strap it would release some tension and do the trick probably

 

[wyodlr]

 

[JimH1]

Well my final fix is some 1" nylon strap and a put a washer between the the fold on the ends of the strap hoping that all the stress will be on the washer and back of the strap and not tear out the the bolt hole. The finished strap is 7" long and lets the the door swing to about 75 degrees of the body with very little stretch.

 

[Toyfarm1206]

There is an updated door stop strap. OSU95-HL4-104R11. They have metal buckles on the ends for the bolts. Local dealer warranted mine.