BRed Dirty Fuel Filter?

[Kelster]

Hey Guys,
I've had some intermittent no start issues, sputtering, lack of power, etc. Local Honda shop recommended pulling the fuel filter. So here we are. Not totally clogged but not pristine clean either. Does anyone know how to remove the brass looking strainer?
I've come this far, I may as well put in a new one. Thanks All

 

[Admin]

 

[NewHere2]

No start / hard issues usually are caused by a clogged / plugged pilot jet.

When you get in that far, blow out the main jet too.

 

[Kelster]

No start / hard issues usually are caused by a clogged / plugged pilot jet.

When you get in that far, blow out the main jet too.

Thanks for the tip. How is the main pilot jet blown out?

 

[HondaTech]

No start / hard issues usually are caused by a clogged / plugged pilot jet.

When you get in that far, blow out the main jet too.

These are fuel Injected so that doesn't pertain to this.

 

[HondaTech]

Hey Guys,
I've had some intermittent no start issues, sputtering, lack of power, etc. Local Honda shop recommended pulling the fuel filter. So here we are. Not totally clogged but not pristine clean either. Does anyone know how to remove the brass looking strainer?
I've come this far, I may as well put in a new one. Thanks All

View attachment 386357 View attachment 386358 View attachment 386359

The sock should pop off, maybe twist off.

The inner filter in the bottom isn't removable without replacing the whole assembly

 

[NewHere2]

These are fuel Injected so that doesn't pertain to this.

Thank You ! My bad !

I flashed back to my sons 3 Wheeler we called Big Red. That was a common problem with that thing.

Showing my age ! Again, Thank You for straightening that out.

 

[SILVER_ALERT]

Thank You ! My bad !

I flashed back to my sons 3 Wheeler we called Big Red. That was a common problem with that thing.

Showing my age ! Again, Thank You for straightening that out.

The three wheeler is the first thing I think of too. Had a friend with one, and it is officially named "Big Red".

 

[Kelster]

The sock should pop off, maybe twist off.

The inner filter in the bottom isn't removable without replacing the whole assembly

Hey There - replaced the fuel pump and my starts are better but I'm getting some rough running at higher rpm and trouble codes. Where can I find the schedule of Trouble Codes? 4 long 1 short.

 

[HondaTech]

Hey There - replaced the fuel pump and my starts are better but I'm getting some rough running at higher rpm and trouble codes. Where can I find the schedule of Trouble Codes? 4 long 1 short.

Is the CEL blinking this code of the gear position?

There is no code 41 for the PGM-FI system

Code 41 for the Drivetrain system is for the Gear Position Switch

 

[Kelster]

Is the CEL blinking this code of the gear position?

There is no code 41 for the PGM-FI system

Code 41 for the Drivetrain system is for the Gear Position Switch

The MIL is Blinking