P500 Deer Lift

[hondabob64]

Has anyone mounted one of these on a 500? I know you can make anything work with the right amount of fabrication.

 

[Admin]

 

[Wallace]

My brother has one on his 4 wheeler it is a very handy tool. With a little mod it should work.

 

[The Green Goat]

I'd almost be inclined to take a snatch block and some cordage with me to create a hoist over a tree branch, and use that to load it on the back/bed. Probably much cheaper and no fabrication.

 

[Bastardchild]

Is that a fat girl scooper?!

 

[DaddyDubbs]

I saw this back in December 2017, thought it looked good and saved the photos. Pretty sure the photos were from this forum but unfortunately, I don't remember where and don't remember who the manufacturer is. So to answer your original question, I'd say it can be done. Looks like they're using a plow sub frame mount. Good luck.

 

[Mudder]

I’ll likely need that to carry trash cans to the road in my older age. Interesting.

 

[Hib]

FWIW If it's only purpose is to haul deer, I've used one of these for years with no issues. Pulled thru snow, over logs and even down gravel roads. Thread rope in a 4' pc of pvc so it doesn't pass you. All for 20$ or less.

 

[hondabob64]

I’m a 57 year old Paraplegic who still hunts so I’m needing something to help load deer when I’m hunting solo. That’s why I was inquiring about the lift.

 

[Wallace]

If you do go this route, you should consider the expanded metal between bars, when the legs fall into the gaps they can be hard to get out. Doesn't unload/dump in the back of a pickup. You have to maneuver perpendicular to bed and drag it out into bed.

 

[500oneer]

Could you use the lift you already have on your machine to load it on a rack like this? Maybe mount some guides on the your back rack to get the angles you need.

 

[MacGyver]

This mounts to my custom plow mount. It works great and I use straps and folding forks to hold deer while lifting. This makes visibility out front much better than a big platform that blocks the view of the trail. The forks, not seen here, can also be used for lifting logs for easy bucking with the chainsaw.

 

[Hib]

I see you have a receiver hitch up front. This might work using your winch. https://www.amazon.com/Viking-Solutions-VS-VSL001-Game-Processing/dp/B00VXURFSG/?tag=sxsweb24-20