![Jankyeye](/data/avatars/m/47/47373.jpg?1721160250)
Jankyeye
Well-Known Member
Lifetime Member
Just installed a Crossroads3D switch plate in place of the “Don’t die” placard on the dash board. First of all, I really wish I had found and done this first thing. The access to the other switch plates is soooooo much easier through the hole in the dash instead of trying to reach through the hood.
The install was simple and straight forward, the dash is really easy to cut with a sharp razor knife. They had several options available with pre etched cut outs that are easily trimmed out.
crossroads3d.com
![C1BC18CA F3AE 4B95 9B3A 5B4018635086 C1BC18CA F3AE 4B95 9B3A 5B4018635086](https://hondasxs.com/data/attachments/365/365012-474029a8c4642dbd95563a7a6803a9f4.jpg)
The install was simple and straight forward, the dash is really easy to cut with a sharp razor knife. They had several options available with pre etched cut outs that are easily trimmed out.
![crossroads3d.com](https://crossroads3d.com/wp-content/uploads/2022/06/P1K22_0.jpg)
Switch Panel for 2022 Pioneer 1000 - Crossroads 3D
This 2022 Pioneer 1000 electronics switch panel mounts onto the Pioneer 1000 dash, replacing the warning label to the right of the shifters. It holds standard sized rocker switches and/or circular holes for USB or voltage meter mounting. This panel comes with all slots “closed” with removable...
![crossroads3d.com](https://i0.wp.com/crossroads3d.com/wp-content/uploads/2018/01/cropped-cr3dlogo-2.png?fit=32%2C32&ssl=1)
![CE6B0BD1 541D 4D70 A99F 5BB2418BA290 CE6B0BD1 541D 4D70 A99F 5BB2418BA290](https://hondasxs.com/data/attachments/365/365010-522ee9a5254ebdef35817591f08e0304.jpg)
![46941674 A8FB 4D5C AC38 47DA8BEB59F2 46941674 A8FB 4D5C AC38 47DA8BEB59F2](https://hondasxs.com/data/attachments/365/365011-c5f92aae6fb766ab01e025490d92c1e2.jpg)
![C1BC18CA F3AE 4B95 9B3A 5B4018635086 C1BC18CA F3AE 4B95 9B3A 5B4018635086](https://hondasxs.com/data/attachments/365/365012-474029a8c4642dbd95563a7a6803a9f4.jpg)