P1000 Coonass build

Deer-hunter · Mar 13, 2017

Been on the forum a while getting information. Bought a pk1 deluxe back in November mostly for hunting.
Items installed
Removed the back section roll cage.
Terra 45
52" curved light bar
Cob dome lights (one on drivers side and one on passengers side)
Rear pod lights
Cob bed light
12 fuse block
140amp solenoid
100 amp disconnect
USB dual w/ voltmeter controlled with a switch to swap batteries
Dual 4" bilge blowers under seat
29.5 x 9.5 outlaw 2's
Itp SS312 14"
Temporary rear panel roof and windshield

Things left to get done
Finish skids and arm guards
Arched front and rear a arms
Bumper with concealed winch with access door to winch
Rear bumper
Aluminum roof
Stereo
Finish illuminated gear indicator
Finish snorkeling
Sealing the air coming through the gears shifters
Rear panel
Dual strong hold gun boot mounts connected to the back of roll bars.

Neohio

JTW · Mar 13, 2017

Looks good.. you sound like me with your list of s*** to get done!

Deer-hunter · Mar 13, 2017

Thanks, Been working out of town, and after hunting season haven't had much free time. Lots of honey dos

popeye · Mar 14, 2017

Deer-hunter said:
Been on the forum a while getting information. Bought a pk1 deluxe back in November mostly for hunting.
Items installed
Removed the back section roll cage.
Terra 45
52" curved light bar
Cob dome lights (one on drivers side and one on passengers side)
Rear pod lights
Cob bed light
12 fuse block
140amp solenoid
100 amp disconnect
USB dual w/ voltmeter controlled with a switch to swap batteries
Dual 4" bilge blowers under seat
29.5 x 9.5 outlaw 2's
Itp SS312 14"
Temporary rear panel roof and windshield

Things left to get done
Finish skids and arm guards
Arched front and rear a arms
Bumper with concealed winch with access door to winch
Rear bumper
Aluminum roof
Stereo
Finish illuminated gear indicator
Finish snorkeling
Sealing the air coming through the gears shifters
Rear panel
Dual strong hold gun boot mounts connected to the back of roll bars.

View attachment 38084 View attachment 38085 View attachment 38086 View attachment 38087 View attachment 38088 View attachment 38089 View attachment 38090 View attachment 38091 View attachment 38092 View attachment 38093

Any more pics of your transparent shifter identification

Sent from my LGMS631 using Tapatalk

Deer-hunter · Mar 14, 2017

The next 2 pictures is it. Those 2 pictures is it hooked up to a 9v battery in the house on the floor. I took a piece of plexiglass and cut it to the shape. Use a deemel with a small rounded engraving point to engrave on the back side of the plexiglass. Wrapped the edge of the plexiglass with a led strip and covered the front and back with a carbon fiber wrap. Cut out the holes on the smooth side in front of each emblem. The picture did not come out good at all. It looks blurry but it actually came out pretty good. I have some more cut out and I want to try something a little different with engraving.