Coolant change/flush.

S

Someguy

Active Member
Jun 15, 2016
181
179
43
Krakow Wi.
Ownership

  1. 1000-3
Now that the talons have been out for about 2 years or better according to the owner's manual you should do a coolant change at 2yrs. Has anybody done this? Is so can you show where drain plugs are? Thanks
 
H

hondabob

Well-Known Member
Lifetime Member
May 14, 2013
1,175
4,601
113
Prescott Valley, AZ
Ownership

  1. Other Brand

  2. 1000-3
Honda put drain bolts in the coolant tubes. Be careful to make sure there is no air in the system. There is a air blead on or near the thermostat housing.

20210519 103857 resized 20210519 103910 resized
 
  • Like
Reactions: Stilly1155
S

Someguy

Active Member
Jun 15, 2016
181
179
43
Krakow Wi.
Ownership

  1. 1000-3
Honda put drain bolts in the coolant tubes. Be careful to make sure there is no air in the system. There is a air blead on or near the thermostat housing.

View attachment 275721 View attachment 275722
Thanks for the pics. Is there a procedure to bleed the air out? Like open bleeder plug while filling until air is removed? I'm just guessing I don't know.