P1000 Brake line pinched

[zmnypit]

Noticed today while pressure washing, my rear brake lines have been rubbing the fox shocks reservoirs when the suspension is compreessed with no sway bar. Ill replace them with steel braided or oem but was I curious if I was supposed to reroute them?

 

[Admin]

 

[JTW]

What’s your setup? I’m guessing you have a HL lift?.... you have to flip the shocks to face the inside if so. If not I dunno? Contact @jak9922 for some braided lines and run them to the other side of the a arm

 

[zmnypit]

What’s your setup? I’m guessing you have a HL lift?.... you have to flip the shocks to face the inside if so. If not I dunno? Contact @jak9922 for some braided lines and run them to the other side of the a arm

Stock a arms, fox shocks no lift. I removed it before riding with the fox shocks

 

[JTW]

Well hell... way to go Honda! I would do the stainless lines anyway.. now you just have a good excuse and then run them to the other side.

 

[ohanacreek]

I think you’ve got the rear shocks swapped side to side. The reservoirs go forward of the axle. The adjustment switch on mine is facing almost forward.

 

[jak9922]

thats why i make these lol thank you honda

 

[JTW]

I think you’ve got the rear shocks swapped side to side. The reservoirs go forward of the axle. The adjustment switch on mine is facing almost forward.


View attachment 72104

Yup... I bet that’s exactly it! Good thinking Mr Sipes!