Can you give me an idea of what you use for back-up lights? If you've got them on your buggy, can you give me an idea of how you installed them and how you switched them, do they come on when you put it in reverse or do you have to flip a switch?
Remington
Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
welcome from the Motor City! 🤟
There is a kit in the store that u can easily do this. I’ve included a link for you.
also if u search it up top, you’ll find hindered of ways guys have done this in many differNt ways and illustrated
Work light Trigger for Auto Backup Light Kit - Honda Pioneer 1000 and 700!
store.hondasxs.com
There is a kit in the store that u can easily do this. I’ve included a link for you.
also if u search it up top, you’ll find hindered of ways guys have done this in many differNt ways and illustrated
Work light Trigger for Auto Backup Light Kit - Honda Pioneer 1000 and 700!
Plug-n-play Auto Backup Light High Mount Kit for Honda Pioneer 1000 / 700
A simple and easy solution to install a backup light. This is a simple and easy solution for installing an auto backup light. It is fully plug-n-play, drop-in ready. The kit does not require any wiring, cutting or splicing of the factory wires. Simply clamp the preinstalled light, feed the...
store.hondasxs.com
Mopower58
CST is the Best!
Lifetime Member
Supporting Member
I did mine long before the kit @Remington posted. I just bought a cheap LED and attached it to the reverse harness. Mine comes on only in reverse,no switch.
TripleB
Well-Known Member
Lifetime Member
DIY Backup Light Harness for Honda Pioneer 1000 and Pioneer 700[2017+]
DIY Backup light harness for Honda Pioneer 1000 and Pioneer 700 [years 2017+].Great for small LED lights, cubes, or rock lights. Wire up your light and plug it in and you are done!Automatically comes on whenever the SxS is in reverse. Available in following lengths for your custom needs...
store.hondasxs.com
On another note, haven’t seen any pics of your machine in any of your post!
as we like to say...
pics or it didn’t happen
I looked through my phone but I don't have any pics. I'll have to remedy that when I get home today.
Mopower58
CST is the Best!
Lifetime Member
Supporting Member
Welcome from Crystal Springs,Ms. I had a shop at Cleary,Ms. not far at all from Richland.
Remington
Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
I did the same as @Mopower58 did before the kit was offered. I had to splice into that same harness. I have 2 LED’s on either side. They keep going out after time from going through a lot of water tho
Last edited:
I installed mine high as I plow snow in the winter and thought higher would work better with less dirt and water, only on in reverse. 4" x 4" LED
Hondoman
Fundamentals are the crutch for the talentless.
Lifetime Member
I mounted mine high as well and put a switch on them. I hunt out of my rig and didnt want the woods lit up when in reverse at dark (unless I needed to).
advertisement
Haldog77
NTC's Mafia Enforcer
Lifetime Member
Welcome MS from your neighbor here in LA. Remington has already said it but I'm going to repeat it, "if you don't have pics it didn't happen." This forum can solve most if not all of your questions and problems. Just ask. Good luck and get them pics.
Remington
Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
May I kindly ask what that switch is on the bottom right next to your volt meter?
Haldog77
NTC's Mafia Enforcer
Lifetime Member
Great minds think alike. I was getting ready to ask that same question.
Hondoman
Fundamentals are the crutch for the talentless.
Lifetime Member
S
I bought the switch kit here because I like the Auto Reverse activation or the flexibility to On or Off without going into reverse.
$79 kit here and I went with simple $20 LED from amazon for lights. easy job!!
$79 kit here and I went with simple $20 LED from amazon for lights. easy job!!
Remington
Fife! POIDH Enforcement Officer
Lifetime Member
Supporting Member
That’s a pricy little bugger. Looks like it’s worth it tho!
I couldn’t see if it works for any stereo or just the wet sounds?
Hondoman
Fundamentals are the crutch for the talentless.
Lifetime Member
It's only a bluetooth receiver/controller. It outputs signal to a microphone jack. I then used an adapter to convert to rca plugs then split them to two amps for a pair of 6.5" component speakers and one 8" sub. You can pause/play, skip tracks or increase/lower the volume with it. Its sounds pretty dang good in my opinion, and can get very loud.
I'm not sure if you can integrate it with a soundbar (wetsounds or other).
ohanacreek
My EcoBoost has I4WD
Moderator
Lifetime Member
Gone up 100% since I bought it.
You can't run a sound bar & sub off of it unless you have an amp that can take a low output(since its being split to two sources) and boost it.
Learned that the hard way when I used it for my wet sounds bar and sub.
It will output to whatever you want as long as you convert the output connector to the input connector
Have the backup kit from the hondasxs store, hands down is the way to go. Get the dual lights with the switch option. Switch option came out after I bought the dual light kit, a true plug and play setup. Had it installed in literally 5min.
advertisement
Similar threads
