P1000 Any ideas?

[tr005]

Anyone have an ideas where this might have come from? ‘16’ 1000/5 deluxe . Looks like a worm screw from a hose clamp. Don’t see any clamps of this size on the machine. Went riding yesterday at a place that gets a lot of orv traffic and lots of sand. Found it after I got done blowing the dust off with air compressor by the front. Possibly picked up by front tires and dropped in a-arm gaurds?

 

[Admin]

 

[Cuoutdoors]

It's off a hose clamp

Sent from my SM-G960U using Tapatalk

 

[DG Rider]

It's off a hose clamp

Sent from my SM-G960U using Tapatalk

+1

 

[tr005]

But not off the 1000 right?

 

[Cuoutdoors]

Check the hose clamps on your air intake from the front all the way to the air filter box. If they're all good you're in good shape.

But not off the 1000 right?

Sent from my SM-G960U using Tapatalk

 

[JTW]

Which guard.. passenger front? There’s a hose clamp right there off the intake.

 

[tr005]

Which guard.. passenger front? There’s a hose clamp right there off the intake.

Found it on the ground after blowing off the machine. The clamp by the intake is still there as are the others. This screw is much bigger than the clamps on the intake. Was wondering if there were other clamps I can’t see without tearing everything apart.

 

[Remington]

That looks like a standard hose clamp bolt. Much like the ones I use servicing generators. If my memory serves me correctly, I don’t think out intakes use standard hose clamps. Similar but slightly smaller.

 

[JTW]

Found it on the ground after blowing off the machine. The clamp by the intake is still there as are the others. This screw is much bigger than the clamps on the intake. Was wondering if there were other clamps I can’t see without tearing everything apart.

Lol.. maybe somebody pitched it in to f*** with ya?