P1000 Added front shock spacers

[drfubar]

Put my spacers in this morning and it firmed the front end up a bit and also lifted it just a tad. It now seems to sit more level than it did after adding the self adjusting rear shocks from a 5 seater which made it sit just a bit higher in the rear.

Thank you to @Eltobgi for gifting me his rear shocks. The DonFather will not forget.

Thank you to @BIGRACK for cutting me two 3/4" spacers for my front shocks at the last minute. With the welding he did on my trailer and the spacers I'm owing him some homemade beer for sure.
Yes I found something else to paint RED!

Thanks to @GlockMeister for giving me information on how he installed his.

 

[Admin]

 

[Tigermark]

Put my spacers in this morning and it firmed the front end up a bit and also lifted it just a tad. It now seems to sit more level than it did after adding the self adjusting rear shocks from a 5 seater which made it sit just a bit higher in the rear.
View attachment 42385
Thank you to @Eltobgi for gifting me his rear shocks. The DonFather will not forget.
View attachment 42381
Thank you to @BIGRACK for cutting me two 3/4" spacers for my front shocks at the last minute. With the welding he did on my trailer and the spacers I'm owing him some homemade beer for sure.View attachment 42378
Yes I found something else to paint RED!
View attachment 42380

Looks good Doc!

 

[elkguide]

SWEET, doc.

 

[Barnstormer]

Put my spacers in this morning and it firmed the front end up a bit and also lifted it just a tad. It now seems to sit more level than it did after adding the self adjusting rear shocks from a 5 seater which made it sit just a bit higher in the rear.
View attachment 42385
Thank you to @Eltobgi for gifting me his rear shocks. The DonFather will not forget.
View attachment 42381
Thank you to @BIGRACK for cutting me two 3/4" spacers for my front shocks at the last minute. With the welding he did on my trailer and the spacers I'm owing him some homemade beer for sure.View attachment 42378
Yes I found something else to paint RED!
View attachment 42380
Thanks to @GlockMeister for giving me information on how he installed his.

the
Has anyone put spacers on load leveling rear shocks and if so what size are the pipes

 

[GlockMeister]

the
Has anyone put spacers on load leveling rear shocks and if so what size are the pipes

Yes..3 in sch. 40 steel pipe

 

[BWAF]

Yes..3 in sch. 40 steel pipe
View attachment 65074

How much did it bring it up? Is that about 3/4 long pcs

Sent from my SCH-R890 using Tapatalk

 

[GlockMeister]

How much did it bring it up? Is that about 3/4 long pcs

Sent from my SCH-R890 using Tapatalk

Roughly 1.5 in. Spacer was cut 3/4 in.

 

[BWAF]

Roughly 1.5 in. Spacer was cut 3/4 in.

Thanks may be something i need to do if i put 235-75r-15" on it

Sent from my SCH-R890 using Tapatalk

 

[drfubar]

the
Has anyone put spacers on load leveling rear shocks and if so what size are the pipes

Yes 3 inch

 

[tbaker]

Has anybody used the lift kit that mounts to the bottom of the shocks they have them on eBay I think they are 2 or 2.5 inch kits

 

[ohanacreek]

Has anybody used the lift kit that mounts to the bottom of the shocks they have them on eBay I think they are 2 or 2.5 inch kits

SMHP1000 - 2" Lift Kit For Honda Pioneer 1000 2016

???

I had one on my 700 and then made a 4.5” version

 

[Barnstormer]

Yes..3 in sch. 40 steel pipe
View attachment 65074

Thank you for the info !

 

[DanDan]

Yes..3 in sch. 40 steel pipe
View attachment 65074

I'm going to ask some of our folks in crafts if they have 40 steel pipe. If they do, exactly what do I need to ask them for. 2018 P1k5D. Prolly with leveling shocks.....I'm not home to check em.

 

[GlockMeister]

I'm going to ask some of our folks in crafts if they have 40 steel pipe. If they do, exactly what do I need to ask them for. 2018 P1k5D. Prolly with leveling shocks.....I'm not home to check em.

Not quite sure what your wanting... but yhe spacers i cut were schedule 40 steel pipe...3in diameter...3/4th in thick.

 

[DanDan]

Sorry for not being very plain with question. Is it 3" ID or OD? Same for front, 2" ID or OD? I figure that's the type question the crafts will ask me.

 

[GlockMeister]

Sorry for not being very plain with question. Is it 3" ID or OD? Same for front, 2" ID or OD? I figure that's the type question the crafts will ask me.

ID

 

[DanDan]

ID

Thank you. I like the idea of the spacers.

 

[DanDan]

ID

Does adding the spacers to the front and back mess up the tire alignment?

 

[GlockMeister]

Does adding the spacers to the front and back mess up the tire alignment?

Didnt for me.

 

[Frogtown]

Does adding the spacers to the front and back mess up the tire alignment?

I recently installed some and there was no noticeable change


Sent from my iPhone using Tapatalk