Accessory wiring

[Quetico]

If I buy this harness, could I use this to wire into a 6-fuse box, and then wire to accessory switches from there?

Honda Talon Power Harness - Version B- Blue Plug Fits Horn Socket!

New product for the Honda Talon 1000 R and Talon 1000 X, x4, LV This Key-On Power Harness for the Honda Talon provides 12v positive and ground for your light-duty power needs. The most common use will be for custom switch panel use as KEY-ON control wire and common for switch backlights. 6"...

store.hondasxs.com

Initially I’d only be running a sound bar, but may add other stuff down the road. My concern is the sound bar specs state 10 amps, and this harness states a 10 amp max. Open to suggestions. I struggle trying to understand wiring.

 

[Admin]

 

[Neohio]

@Hondasxs will be able to answer with confidence. Sit tight and he will chime in.

 

[Hondasxs]

Hi.
Yes, you could.
But you should not because of the very thing you mention.

It's only has a 10a rating. It's designed more for a trigger wire or at max 1 or 2 small accessories.

Use this to control your stinger or other relay that will send high amp loads to the volt meter.

 

[Barracuda]

I used this keyed pigtail to switch on a relay which then powers up the other relays - essentially doing what you are asking. My accessory relays are also fused and wired to my accessory battery. It can be done without overloading the circuit if you are a little creative...

 

[Mdsiman]

I plan to get this as well to power a 12v relay, but my question is what to do with my other key on power accesories?
I have my ryco street legal kit currently plugged into the blue plug. And I plan to get the Hess i4wd delete( but I did find out they offer another plug connected to splice).
Should I just cut off the plug of the ryco and go straight to my fuse block?