P1000 Academy Sports goodies

[jenk61]

I know that I have read where someone used the cupholders from Academy Sports. I purchased a pair of them this week as well as a couple of cushions for the rear seats. I removed the original cupholders and these fit in the same hole without modification. I did put some Gorilla mounting tape at the top of the cupholder where it fits in the hole to make it even more secure. It will now hold any Yeti or Rtic cup I have tried.....maybe not tight......but they will fit nonetheless . The cupholders were in the boating section and were $2.99 each. The cushions I bought were Game Winner brand and were $7.99 each. They fit snug in between the seat belt buckles and also fit in the floorboard for storage when not in use. The covers even come off if you wanted to wash them.

 

[Admin]

 

[Remington]

cushions look good.
as for the cup holder, have u takin the rig for a good trail ride with that tall mug in there yet?

 

[jenk61]

cushions look good.
as for the cup holder, have u takin the rig for a good trail ride with that tall mug in there yet?

No I haven't, it's a little sloppy with the big tumbler, but it does fit. I didn't have that option with the orginal cupholder. When I get time I think I will 3D print a ring for the cup out of flexible tpu to make for a tighter fit. I have the Superatv split windshield and the cup will fit though.

 

[Remington]

No I haven't, it's a little sloppy with the big tumbler, but it does fit. I didn't have that option with the orginal cupholder. When I get time I think I will 3D print a ring for the cup out of flexible tpu to make for a tighter fit. I have the Superatv split windshield and the cup will fit though.

Im just thinkin with that hight on a good rocky bumpy trail your gonna have wet pants lol.
why not cut the hole bigger like rest of us did so the insert fits flush down in and your cup is more sturdy? just a thought.

 

[toddvdh]

…….why not cut the hole bigger like rest of us did so the insert fits flush down in and your cup is more sturdy? just a thought.

This is what I did also. About 2 minutes per hole with a deburring bit in my cordless drill. Without them down it was hard to get the cup out without hitting the windshield.

I think I have the same rear pads. They work really good for kids.

 

[bumperm]

As toddvdh said. Easy mod. Did mine with a drum sander in a drill motor. Bigger hole also provides easier access for some stuff while wiring accessories.

 

[jenk61]

Im just thinkin with that hight on a good rocky bumpy trail your gonna have wet pants lol.
why not cut the hole bigger like rest of us did so the insert fits flush down in and your cup is more sturdy? just a thought.

Good idea, but I would need therapy before I could do that. I just rolled over 100 miles, had machine less than 2 weeks. I had a difficult time talking myself into the rear door storage mod. At least there I could cover if I made a mistake. Most of the time if I were to use the bigger cup it would probably be just road riding. I think you guys did a really nice job on yours. If I come up with an alternative to wet pants, I'll post it.

 

[Remington]

Good idea, but I would need therapy before I could do that. I just rolled over 100 miles, had machine less than 2 weeks.

You should have seen what I did in that span 😂

 

[Jas sxs]

I found some cup holders on line the look just like the factory one and heavy build they were 3D printed for a yeti cup and such they were like $ 35.00 for the pair and look factory I don't remember I think amazon maybe E bay it was fast had in 2 0r 3 days
HIGHLY RECMEND

 

[jenk61]

I found some cup holders on line the look just like the factory one and heavy build they were 3D printed for a yeti cup and such they were like $ 35.00 for the pair and look factory I don't remember I think amazon maybe E bay it was fast had in 2 0r 3 days
HIGHLY RECMEND

Yeah I saw those but really wanted to avoid cutting the dash. Thanks for the suggestion though. I've got a 3d printer, just need to take some time and try some other things.

 

[Jas sxs]

yes I had to make the factory wholes about 1/4 in bigger but u cant tell it a fiend of mine has the same bike and and when he saw my yeti in mine and his is stock I told him his must have been made wrong and was puzzled for two days

 

[Gabbas]

As toddvdh said. Easy mod. Did mine with a drum sander in a drill motor. Bigger hole also provides easier access for some stuff while wiring accessories.

View attachment 324600

Am I not seeing your headlight switch ? Lol. It looks different.

Sent from my Pixel 4a (5G) using Tapatalk

 

[bumperm]

Am I not seeing your headlight switch ? Lol. It looks different.

Sent from my Pixel 4a (5G) using Tapatalk

Yessir . . . the LE / SE have a different (much faster, even than red) panel design.

 

[Gabbas]

Yessir . . . the LE / SE have a different (much faster, even than red) panel design.

I thought I knew a lot about the LE's. I did not know the headlight switch moved. That seems odd. Haha

Sent from my Pixel 4a (5G) using Tapatalk

 

[jenk61]

Good idea, but I would need therapy before I could do that. I just rolled over 100 miles, had machine less than 2 weeks. I had a difficult time talking myself into the rear door storage mod. At least there I could cover if I made a mistake. Most of the time if I were to use the bigger cup it would probably be just road riding. I think you guys did a really nice job on yours. If I come up with an alternative to wet pants, I'll post it.

I printed a band for my big tumbler with flexible filament. It tightens the cup up in the hole, without cutting the dash. Maybe not the best solution, but, is ok for me for now. Doesn't necessarily keep it from being top heavy, but it's better than a sharp stick in
the eye.

 

[Jas sxs]

I printed a band for my big tumbler with flexible filament. It tightens the cup up in the hole, without cutting the dash. Maybe not the best solution, but, is ok for me for now. Doesn't necessarily keep it from being top heavy, but it's better than a sharp stick in
the eye.

View attachment 326206View attachment 326207

it could also double as a hair band for your lady

 

[jenk61]

What makes you think she has hair?😆

 

[Jas sxs]

What makes you think she has hair?😆

lol i know the feeling

 

[bumperm]

lol i know the feeling

Oh that . . . okay then, it'd make a great choke collar.