N
Been lurking a while, finally got around to my 600 mile service on my 2016 P700. Two odd things I discovered in changing all the fluids, the front differential oil came out it was mostly an appropriate oil color but there was something suspended in the oil that was white in color. I wouldn't say it was water in the diff fluid, but more like break in oil looking. wasn't sure if these diff's used a break in oil from the factory. I changed it out as well as rear diff, oil, air, and checked my valves (amazingly didn't need adjusting). But when I pulled the plugs I got concerned. The top plug came out normal looking. The lower plug, it was covered in some sort of cooked on metal flakes. Pictures attached. I flaked some of it off before taking the picture but there was no way that plug had been firing properly. Have others seen this? I'm right at 600 miles and was kinda surprised the plugs were worn as much as they were. The machine doesn't use oil, Doesn't smoke, or any other problems but I was concerned about the state of that one plug. Also, after changing the differential oil / oil change has everyone else noticed a significant decrease in noise? It was dramatic, even though the diff's were full with the old fluid they sure chattered and whined alot.