P1000 4wd problem

[Bobbybl30]

Have 2016 Honda Pioneer 1000 5 just got a new clutch installed and when put it in 4wd in the mud or sand it pops out and make a clacking noise and goes back in 4wd. When u gas it in 4wd it pops out, what could be the problem

 

[Admin]

 

[GlockMeister]

Have 2016 Honda Pioneer 1000 5 just got a new clutch installed and when put it in 4wd in the mud or sand it pops out and make a clacking noise and goes back in 4wd. When u gas it in 4wd it pops out, what could be the problem

Sounds like the 2wd/4wd cables need to be adjusted... the adjustment box is under the driver side rear floorboard.
Look here
P1000 - turf mode selector

 

[JACKAL]

Sounds like the 2wd/4wd cables need to be adjusted... the adjustment box is under the driver side rear floorboard.
Look here
P1000 - turf mode selector

Ditto! Shift mode selector cable adjustment needed.

 

[Tundra20]

So today while iut riding put the 1000 in 4wd it does gonin almost immediately but takes it forever to show up on the indicator anyone know whats up with this not a big concern just curious

 

[JTW]

So today while iut riding put the 1000 in 4wd it does gonin almost immediately but takes it forever to show up on the indicator anyone know whats up with this not a big concern just curious

Your machine just has a learning disorder... takes it a bit to communicate its thoughts.

 

[Tundra20]

Lol well all good i guess its slow like me but steady

 

[Tundra20]

Ya was going over some rough stuff and some rocks git bout half way up relize its climbin like a goat but still a no show on the screen thought mabe something to do with sensor

 

[ohanacreek]

So today while iut riding put the 1000 in 4wd it does gonin almost immediately but takes it forever to show up on the indicator anyone know whats up with this not a big concern just curious

Adjust the linkage (flux capacitor) under the bed behind the driver. You may have to tinker with it depending on cable stretch but this is a good starting point.

 

[Tundra20]

I will play with it tomorrow thx for ur input

Thx for urs too jtw lol my rig now think its slow

 

[snuffnwhisky]

There are also 2 adjustments on the front diff. Both are passenger side, rear and (front, behind a plastic cover) of the diff. If your cable box adjustment under the bed is good and the dash light are working quickly and correct, and it sound like loud popping from the front, tighten the fronts depending on if its from 4wd or difflock. The rear adjustment controls 4wd. The front, diff lock.