P700 4 wire power connector under hood

[dalis7393]

Hello,
I found a 4 wire connector under the hood on the drivers side that has one wire power up when key is on. Is this supposed to have all 4 power up? Is this for pulling power for accessories? Any help will be appreciated. Thank You.

 

[Admin]

 

[Mudwing]

Hello,
I found a 4 wire connector under the hood on the drivers side that has one wire power up when key is on. Is this supposed to have all 4 power up? Is this for pulling power for accessories? Any help will be appreciated. Thank You.

I think that’s the diagnosis port. I used the accessory sub harness that plugs into the back of the 12V outlet. Here’s one from “The Store”. 😉ACC Socket Independent and KEY-ON Pigtails. Honda Pioneer 500, 700, 1000 / Talon 1000

 

[dalis7393]

Thank you. I am going to be adding a separate fuse bank in the under hood compartment and will be pulling power directly from the battery to the unit i put under the hood. How would I make this panel hot when key is on instead of hot all the time? Is there a relay that would do this? I just dont want the rocker switches for my accessories illuminated all the time pulling power.

 

[Mudwing]

Thank you. I am going to be adding a separate fuse bank in the under hood compartment and will be pulling power directly from the battery to the unit i put under the hood. How would I make this panel hot when key is on instead of hot all the time? Is there a relay that would do this? I just dont want the rocker switches for my accessories illuminated all the time pulling power.

You’re gonna want a stinger relay. Something like this. I just pulled this link off Amazon. So do your research for your needs. 😉https://www.amazon.com/Stinger-SGP38-80-AMP-Battery-Isolator/dp/B001HC6UJ0/?tag=sxsweb24-20

 

[dalis7393]

Thank you. I appreciate your help.

 

[Mudwing]

Thank you. I appreciate your help.

Post some pics after. I’m getting ready to do the same thing here in the next month or two. Thanks. 😉

 

[dalis7393]

Post some pics after. I’m getting ready to do the same thing here in the next month or two. Thanks. 😉

I will. Now i am trying to locate an under hood battery mount that i can purchase for my second battery. I have seen many that people have designed and made on their own but have not seen any that i can purchase.

 

[dalis7393]

Hey, This is what i have installed so far. Everything is working beautifully. I am attaching photos of the side mirrors with led lights, the rocker panel, isolator/relay, fuse panel and speakers i just completed installing. I am still looking for a good mount for a second battery and also going to work on the winch and also installing some rear led lighting. The rocker panel i put in will allow me to expand. Thanks again for your advice on this.

 

[Gator]

Where did you get the mirrors?

I can't have side mirrors because I keep ripping them off. But if my rear view mirror had LEDs...

 

[dalis7393]

Xprite UTV Rear View Side Mirrors with Clear Lens LED Spot Lights fit 1.5-2.5 Inch Roll Bar Cage for Polaris RZR XP 1000, ATV, UTV, Side by Side, CAN-AM Maverick X3, Teryx, Yamaha
by Xprite