P700 28s on stock rims

[Mitch8k]

I have been through all the threads and can't find a definite answer. I know 28x10-12 will fit on the front. Just want to be sure 28x12-12 will fit on the rear before I buy. Planning on running mud lite xls. Thanks!

 

[Admin]

 

[Slackjaw]

Tag. I'm considering putting 28" on my p700-2 with the stock deluxe wheels.
I really like the idea of light truck radials but don't want to pay $ to upgrade the wheel size.

 

[Russ989]

Tag. I'm considering putting 28" on my p700-2 with the stock deluxe wheels.
I really like the idea of light truck radials but don't want to pay $ to upgrade the wheel size.

It’s only money, or at least that’s what they all tell me.

 

[Russ989]

I have been through all the threads and can't find a definite answer. I know 28x10-12 will fit on the front. Just want to be sure 28x12-12 will fit on the rear before I buy. Planning on running mud lite xls. Thanks!

I’m not sure, I went with 26” Roctane XD’s on 14” Beadlock wheels on my 700 and they fit well but I think 28’s could be a stretch when turning.

 

[Slackjaw]

It’s only money, or at least that’s what they all tell me.

I'll probably end up with 27" stock width radials with less aggressive lugs. The locked rear really tears things up around the farm.
I don't really need the clearance of the 28" and I can't seem to get a clear idea if the 28" will rub.
Just going with 27" sounds like a safe bet.

 

[JimmyA]

27's is what I am running on deluxe wheels and no rubbing, 27/9/12 Terrabites

 

[Alan_Vander]

I test fit my 32s on 16s on the rear of my 700-4 with 2.5 lift just to see what it looked like. I cant find the picture of it though ill keep looking to give you an idea. But it did bolt up and not touch anything.

Sent from my moto z4 using Tapatalk

 

[Alan_Vander]

Found them. This is with the jack off it and i jumped on the side bar to settle it.

Sent from my moto z4 using Tapatalk