P1000 28" moto mtcs

[Jayme]

28x10 mtc on all four corners

 

[Admin]

 

[Marine660]

Any rubbing? Lift required?

 

[Jayme]

No lift and no rubbing. There is plenty of room. I wish I would have went with 30" mtcs

 

[Marine660]

No lift and no rubbing. There is plenty of room. I wish I would have went with 30" mtcs

Wow, I want 30s but everyone has me scared that they will rub. The more clearance I can get the better I am for rocks and roots.

Do you have close ups of wheel wells, especially at full lock with steering

 

[Jayme]

That is at full turn. 30s may be close rub but I'm not sure what they measure

 

[DTAGG]

View attachment 8116 That is at full turn. 30s may be close rub but I'm not sure what they measure

what is actual size in width for the front or did you do all 4 tires the same size as rear?

 

[Jayme]

All four tires are 28x10. However I had the mtcs put on the stock deluxe wheels. So if I'm not mistaken the stock rear wheels are wider than the front wheels.

 

[Jayme]

With 10lbs of air in the front tires my tires measured 27 3/4" tall

 

[joeymt33]

Thanks for that measurement. I checked the website and the specs said 28" was the actual....it's usually not the case with most. I hate that.