P500 26x9x12 on all 4 corners

[tlbarnett1]

I’ve search and have found no information. I’m probably not putting in the correct key words.

I’m new to the p500 work and want to replace the tires. Is there any issue with putting 26x9x12 on all 4 corners on stock rims? Any disadvantages with narrower tires on the rear? Will they work fine on the 7.5” rims? I prefer the look but want to maintain performance. I plan to use the p500 for hunting and very moderate trail riding. I have no plans for extreme mud bogging.


Sent from my iPhone using Tapatalk

 

[Admin]

 

[Mudder]

@tlbarnett1 , Maybe ask @JACKAL , posted, 2017 with 25" or 26" tires, under Wheels and Tires, may be more out there, or 27x12-12 Bighorns on the stock rear wheels

 

[trigger]

@Chooglin will know. He's running same size on all four.

 

[Chooglin]

I was going to reply to this thread but he was asking about mounting them on stock wheels.

I am pretty sure they would work ,but would be a little concerned about the front wheels . The stock fronts are 6.00 wide and the rears are 7.500 wide.I would think there is going to be a good bit of bulge on the front tires!!!

Mine are 12x9x26 Bighorns on 5+2 wheels.

 

[JACKAL]

I’ve search and have found no information. I’m probably not putting in the correct key words.

I’m new to the p500 work and want to replace the tires. Is there any issue with putting 26x9x12 on all 4 corners on stock rims? Any disadvantages with narrower tires on the rear? Will they work fine on the 7.5” rims? I prefer the look but want to maintain performance. I plan to use the p500 for hunting and very moderate trail riding. I have no plans for extreme mud bogging.


Sent from my iPhone using Tapatalk

I am running 26x9x12 Roctane XD on the OEM wheels for over 2 years no problems on my P500.

 

[Twitch]

I'm running 26x9x12's all the way around on the stock 6" wide rims and like it.