Look for blue tape under the hood, under the dash along the main wire harness.
There should be 2 spots with blue tape on the Deluxe and Trail models.
Forest and Base only has the one above the primary battery.
One to the passenger side...
Above where ppl install the second battery is what you are looking for.
Inside the tape is a wire loop. 1 for the Trail model and 3 for the Deluxe model.
This is your feed and fed wire.
We have extensions in the store.
One wire is power IN from a source (battery or other).
The second wire is power OUT to the accessory.
You will need to find a ground for your accessory.
Also, these are rated for 3 amps max.
So recommend small accessories or to trigger a relay.
Blue tape above the primary battery is a key-on connector. We sell a harness for this as well.
The 2022 Pioneer 1000 Deluxe and Trail model include On/Off switches that has no immediate use. The Deluxe has 3 unused switches, the Trial has 1 unused switch. Here we provide wiring with the proper connector to utilize those switches. Our kit includes a 2 pin connector to replace the dummy...
store.hondasxs.com
This is a single pin with a wire for the ACC connector dummy plug found on the new 2022+ Honda Pioneer 1000 and the new 2022 Honda Talon 1000. Works with the following for key-on ACC power: 2022+ Honda Talon 1000 (X/R/X4/R4) 2022+ Honda Pioneer 1000 (3/5/6) 2023+ Honda Pioneer 700 (2/4) Use...
store.hondasxs.com
