Looking at the parts fiche, it looks like only the middle skid plate has changed. Can someone with a 2017 P500 confirm only the middle skid is metal? Thx.
OK, never mind! 
I just ordered a set of 3/8" UHMW ones from UPI, off of ebay. For those who may be considering, start with an offer lower than $220.
15-17 HONDA PIONEER 500 3/8 UHMW POLY SKID PLATE BASH GUARD OFF ROAD | eBay
I just ordered a set of 3/8" UHMW ones from UPI, off of ebay. For those who may be considering, start with an offer lower than $220. 15-17 HONDA PIONEER 500 3/8 UHMW POLY SKID PLATE BASH GUARD OFF ROAD | eBay
Last edited:
Quick processing and shipping. Skids are already in the hand of FedEx, and predicting a Saturday delivery.
luckymike
Well-Known Member
Lifetime Member
Let us know how you like themQuick processing and shipping. Skids are already in the hand of FedEx, and predicting a Saturday delivery.
Will do. Will start another thread because I can't seem to change the title of the thread.
luckymike
Well-Known Member
Lifetime Member
No, it is plastic like the front and rear. It is not in front of me, but would say about 1/4" thick.
CORRECTION: They are only 1/8" thick.
Last edited:
Don't know. I imagine that those who ride around much more rock than I, have a much higher probability breaking those plates. I have skidded over a few logs, but most of the weight must have been at the frame rails.
One reason I went with the thicker UHMW is, when going over small log/big sticks, they break when the front tire goes over, and the inside edge whacks against the skid plates. Made some good noise, but no permanent damage. I had a few sticks find the oem holes in the skid plates, and get stuck, but didn't find any vital parts.
FWIW: The price for both the 1/8" plastic and metal were about the same, according to that parts fiche. $45-47ish, from memory.
Similar threads
- bocash3
- Pioneer 500/520 Shop Talk