suspension

  1. Joshk1908

    P1000 Shocks on rear sway bar

    So after doing some research it appears allot of people are disconnecting their rear sway bar to get a little better ride. That being said, the talons and razors have a sway bar shock on the end links. Has anyone added a sway bar end link shock on the pioneer?
  2. D

    P1000 Self-Levelling suspension

    Morning everyone, After reading through my owners manual I have found very little info on how the rear suspension self levels. Can someone on here please explain to me how the self levelling suspension system works on the 2023 P1K-5? I am getting some really strange wear on my right rear tire...
  3. tromano1706

    P1000 Fox vs Elka Suspension

    I've searched through previous posts and cannot find what I'm looking for. As with most of us, the stock suspension leaves something to be desired for. I am ready to purchase a new set and am wondering if anyone has a recommendation as to if a full set of Elka's is worth 2-3 times the Fox...
  4. Nkbrucks1

    P1000 rear suspension

    Has anyone had their 1000-5 rear wheels look like this / \ after just 1100 miles of road riding? bearings are tight bushings are tight nothing wet on the shock from leaking. Never had more than two little kids in car seats in the back. Machine is a 2021. Will get pics tonight.
  5. NDavies

    Suspension Upgrade Suggestions?

    Hi, new to the group, I've got a 2016 Pioneer 1000-EPS, used it mostly for farm use over the past 5 years, some simple off road trail runs to some local lakes. Looking to upgrade the stock suspension to handle more heavy higher speed bumps/rocks and some hill climbing/rock crawling. Currently...
  6. C

    P1000 Back tires toed in after lift and spacers

    I have a 2021 1000-5 and after I put the a arm kit, 3” lift, and wheel spacers from SATV on it made the back tires toe in pretty bad. Anyone else had this issue or know what it might be? Thanks in advance
  7. K

    P700 Noob - Help!

    So I’m new to the forum… bought a Pionner 700-4 brand new in 2019 as a utility vehicle, etc. Have really babied it, almost no off-road use, will drive through a meadow every now and then…. kindve just cruise around the subdivision periodically, etc. Anyway, I’ve always noticed since I got...
  8. Assault-mouse15

    P500 Lift kit

    Hey guys, iam building a lift kit and not using coil spacers, from the bottom spring mounts ,probably 1 to 1.5", Will the stock axles be good with that?
  9. cspenc12

    Fox Live Valve Indicator not working

    I just purchased the 2021 1000X 4 with the Fox shocks and Jackson turbo. I’ve now taken it out twice to realize the suspension indicator (normal/sport) is not lit up on my dash. When I toggle the button nothing happens. I just reached out to the dealership today and waiting to hear back from...
  10. jcrowe645

    Suspension

    I know there are several post about this subject over and over again. I feel like I have gone in a rabbit hole trying to research shocks. I just purchased a new 2021 1000-5 deluxe last week. I am looking for personal opinions from people who have changed the shocks on their personal units. I...
  11. J

    Suspension Spring Noise Normal??

    Hello Everyone! Brand new to the forum but have been scouring posts for a while now while I was deciding on a machine. Picked up a new 1000R last week and took it on its maiden voyage over the weekend. Absolutely love the machine and it performed as expected. However after getting it home...
  12. E

    P1000 Stock Pioneer 1000-5 LE w/ System 3 xtr370 28" tires

    Our 2017 pioneer 1000-5 LE with stock suspension and wheels, no spacers, no lift. With 28x10R-14 System 3 XTR370 X-Terrain tires. I can get them to rub slightly at full lock, and some rubbing when flexing out the suspension. So far I'm in love with them.They feel so much better than the stock...
  13. Steve00

    P500 P500 Walker Evans preload adjustment thoughts

    I got my Walker Evans hooked up with a 1.5 wheel spacers and remove sway bar amazing Improvement just need some advice on the preload adjustments I'm 300 lb I kept it as light as possible on softest setting the ride was good but I FEAR that I will bottom out any advice other than going on a diet LOL
  14. Steve00

    P500 Softer springs for p500

    Hey gang! I just canceled my order for Walker Evans shocks. I couldn't stomach $1,200 for what seemed to be the only shocks available for my quad. Has anyone had luck with any other brand of aftermarket shock and getting a smoother ride from it? I'm just looking for a budget solution to get a...
  15. SouthwestORV

    P500 Can the Pioneer 500 FLY? Yes...but it hurts to land (video)

    As the title says, I tested the flight capabilities of our little 2018 Pioneer 500 this past Wednesday. It was fun! Nothing broke...no one got hurt...but the landing was a little rough. :) I measured where the tires left the sand to where they touched down = 36 ft. There, now you don't have to...
  16. B

    P500 Looking for suspension advice

    Hey guys I've owned my 500 going on 4 years now since 2015, and getting to the point I want to do something to improve the ride. I am looking for some advice and ideas from you guys that have done the suspension mods. Starting off I do realize the p5 is what it is with only 5.9 inches of travel...
  17. T

    P500 Request: Air Shock Update /Review

    Hey all, I'm hoping to hear some input from the people who have installed air shocks and have significant miles/hours on them. I've read the install threads and initial opinion threads, but looking for guidance from those with a lot of miles/hours on their shocks. I have some questions if any...
  18. T

    P1000 Pioneer height question

    Hi, I was about to buy a 2017 pioneer 1000 5s deluxe. I went to look at it one last time and realized that it wouldn't clear my garage door. The specs say it's 76.5 inches and I can only get my door up to 75. My question is can anyone tell me how much it will lower loaded? Wondering if I...
  19. A

    P1000 Wanted LOAD ADJUSTING shocks for rear

    Looking for a set of OEM 08Z70-HL4-A51 for the rear of a pioneer 1000 3 EPS Prefer new take offs but would entertain anything let me know what you have and price. Thanks Alex

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!