snorkel

New to the HondaSXS world. Just purchased a 2022 Honda Pioneer 1000-5 Trail Edition. Had the ArmourTech cab, front and rear windows, and doors factory installed. Also waiting on rear top and extra battery to come in. I had an issue with the i4wd warning light within the first 5 hours of use...

Hello, I have a question regading a snorkel kit I just bought. I see it comes with check valves for all the vent lines for my Talon. I have read that usually gas tank and diffs need both directions to prevent vacuum and blow seals. anyone using this setup? Also their pioneer kit comes with...

Do I need a Snorkel? I dont play much in deep water or mud so do i need a snorkel and is there ANY benefits other than mud/water?

New to forum and sxs. Installed the snorkel kits to Honda pioneer 700 and 700-4 without any issues (700-4 was more involved and required some adaption). The pictures that came with the kit for the vent lines is really unreadable. Was hoping someone who already did this can give me some...

recently installed the 2.5” highlifter lift kit on my 700. No problems at all so far, I threw some 28” BKT AT171’s on there on some m12 diesel 14’s gave a lot of clearance. SYA snorkel, half windshield, boss speaker and all. Just missing a roof because I’m thinking about getting the hump on the...

Hey guys hope y’all would chime in on this subject. I am in the process of snorkeling my machine and extending vent lines/fuel/diff/etc.. I live in Florida a lot of my riding consist of sandy trails with lots of swamps and various water obstacles. I never search for mud or stay in it for long...

So last week I got into a little swamp and filled her full of water, After a week of cleaning and drying out, I snorkeled the P5 and ran all the lines into the cage. This weekend we went for an 80km run and I found it had more bottom end power but seemed to struggle on higher speed/power. I did...

I have a 2016 1000-5 deluxe that’s basically stock mechanically. How deep can I drive into water at a slow speed without worrying?

After seeing other graphics on people's pioneers I contacted Walter at UTV graphics to do some for me. I have always been a fan of The Haunted Tank comics and the General Lee from Dukes of Hazzard so I decided a mashup of the two would look great on my orange pioneer. These are Walters mock...

Ok people I'm snorkelling my mule . What is the best way to run the rear differential vent line? Seems like everywhere I go I'm getting pinched or it is on the heat shields.

2017 P500 snorkeled everything. Dielectric greased everything. So here's the problem. On 2 separate occasions I've gotten in deep enough water that my exhaust has been underwater and it has died. I've been in this deep more than twice but it has only died twice. On both occasions I went in the...

Hello, I have a 2016 1000-5 and am in search of side doors for the front seat and possibly the back seats. I am also insearch of a snorkel kit that will work with my windshield that pivots open. Please let me know if anyone is selling their used parts or if there are any cheap deals on new...

Here are all the vids for snorkeling and extending the vent lines of the P5 that will allow you to traverse deep water and mud holes without having to worry about destroying your machine as easily. Feel free to message me with any question you have on the process, or if I missed something...

If anyone is interested as to what all is involved with building a snorkel, extending the vent line, and making the P5 deep water ready in general, head over to the Appalachian Mountain Riders section of the forum. I have detailed vids covering the whole process from start to finish. Well...

Thanks to this video I was able to make 2 snorkels for my son and his friends p500. You can see my pictures and video here. I still need to seal the air box door with silicone and snorkel the vent lines.

I think some members have done the same thing but I haven't seen a post in a while. This might help newer guys/girls. This is the @joeymt33 style snorkel.

I saw on the Honda Pioneer 1000 Riders FB page that the bellows that HighLifter provides in their snorkel kit aren't up to specs and that HL is replacing them with 10ft. of tubing. I was also saw people suggesting to only put a good quality bellows on the front and rear diff, fan motor, and...

Howdy everyone, this is the beginning of my probably very slow build,been slowly piecing it together since feb. here's what I've got so far... factory roof two piece hardcoat windshield soft rear panel home made insulation under seat Home made bug screen Custom overhead stereo gun rack Light...

Well after my last trip, and tearing off my first try at a snorkel on the narrow trails around me, I decided I needed something a little more substantial, and tucked away inside away from the trails. I went and grabbed some 3" 1/16" wall pipe, and some 16ga steel, and started fabbing away...

Put a snorkel on over that past few days and ran all my vent lines, came out nice. Easy job, I'd post a picture if i could.